You’ve got deadlines breathing down your neck and equipment sitting in the wrong place. Every day that excavator or bulldozer isn’t where it needs to be costs you money and pushes your timeline further back.
We handle the logistics so you can focus on what matters. Your equipment gets loaded properly, transported safely, and delivered on schedule. No surprises, no damage, no delays that derail your project.
When your equipment arrives intact and ready to work, your crew can get straight to business instead of dealing with transport headaches or equipment issues caused by poor handling.
We’ve been moving equipment in the Bald Mountain area since our logging days back in 1997. We know these roads, understand the terrain challenges, and work with the local regulations that can make or break a transport job.
This isn’t some national company learning your area on the fly. We’ve dealt with the rocky conditions, seasonal access issues, and permit requirements that come with working in this region. Our equipment stays maintained, our operators stay experienced, and our approach stays straightforward.
You’re working with people who’ve built our reputation one successful move at a time, right here in Bald Mountain and the surrounding areas.
First, we assess your equipment and determine the right trailer for the job. Whether it’s a lowboy for that excavator, an RGN for ground loading, or a Landoll trailer for specialized equipment, we match the trailer to your specific needs.
Next, we handle the permits and route planning. New York has specific regulations for oversize loads, and we know exactly what’s required to keep your transport legal and on schedule. No last-minute permit delays or route surprises.
On transport day, we load your equipment using proper securement techniques and transport it safely to the destination. You get real-time updates, and we handle any issues that come up along the way. Your equipment arrives ready to work.
Ready to get started?
We operate lowboy trailers rated for over 100,000 pounds, perfect for excavators, bulldozers, and other heavy construction equipment. These low-deck trailers provide the stability and clearance needed for safe transport of tall equipment without height restriction issues.
For ground loading situations, our RGN (Removable Gooseneck) trailers let you drive equipment directly onto the deck. No ramps, no complicated loading procedures. Just drive on, secure, and transport.
Our Landoll trailers handle the specialized jobs with their hydraulic tilt capability and sliding axle configurations. Whether you’re moving forklifts, scissor lifts, or equipment that needs precise positioning, these trailers adapt to your loading requirements. In the Bald Mountain area, where access can be challenging and terrain varies, having the right trailer makes the difference between a smooth transport and a complicated mess.
We operate a fleet of specialized trailers designed for different equipment types and loading situations. Our lowboy trailers are rated for over 100,000 pounds and feature low deck heights perfect for tall equipment like excavators and bulldozers.
For situations where you need to drive equipment directly onto the trailer, we use RGN (Removable Gooseneck) trailers. The front section detaches to create a ramp, making ground loading simple and efficient.
We also operate Landoll trailers with hydraulic tilt capabilities and sliding axle configurations. These are ideal for specialized equipment, forklifts, scissor lifts, and situations where precise positioning matters during loading and unloading.
New York requires permits for oversize loads, and we handle all the paperwork and coordination with the state Department of Transportation. We know the specific regulations, including the restriction that oversize loads can only move from half-hour before sunrise until half-hour after sunset on weekdays, with Saturday transport ending at noon.
We plan routes carefully to comply with width restrictions, bridge clearances, and weight limits. In New York City, width is restricted to 8 feet, while the rest of the state allows 8 feet 6 inches. We factor these limitations into our route planning.
For loads that exceed standard oversize dimensions, we coordinate Super Load permits and any required escort vehicles. Our experience with local regulations means your transport stays legal and on schedule without permit delays.
Lowboy trailers are the standard for heavy equipment transport, featuring a low deck that sits close to the ground for stability and height clearance. They’re ideal for most construction equipment like excavators, bulldozers, and similar machinery that needs to be loaded with ramps or cranes.
Landoll trailers offer more versatility with their hydraulic tilt capability and undercarriage roller system. They can adjust their angle to create loading ramps, making it easier to load equipment without separate ramps. They also handle weight distribution better across multiple axles.
The choice depends on your specific equipment and loading situation. For standard construction equipment with conventional loading, lowboys work perfectly. For specialized equipment, ground loading situations, or when you need the trailer to adapt to difficult loading conditions, Landoll trailers provide the flexibility you need.
For standard equipment moves within the local area, we typically recommend scheduling at least 48-72 hours in advance. This gives us time to coordinate the right trailer, handle any permit requirements, and plan the optimal route for your specific equipment.
For oversize loads or moves that require special permits, plan for at least a week’s notice. New York’s permit process can take several days, especially for loads that exceed standard oversize dimensions or require escort vehicles.
During busy construction seasons or for long-distance moves, more lead time is better. Weather conditions in the Bald Mountain area can also affect scheduling, particularly during winter months when road conditions may require route adjustments or timing changes.
Every piece of equipment gets properly secured using chains, straps, and blocking appropriate for the specific load. We follow Department of Transportation securement requirements and use tie-down points rated for the equipment’s weight and dimensions.
Our drivers are experienced with heavy equipment transport and understand how different types of machinery need to be handled. They perform pre-transport inspections, monitor the load during transit, and conduct safety checks at regular intervals.
We also carry comprehensive insurance coverage and maintain our trailers to strict safety standards. All equipment gets inspected before loading, and we verify that hydraulic systems, attachments, and any loose components are properly secured or removed as needed for safe transport.
Yes, we provide equipment transport throughout New York State and can coordinate moves to neighboring states when needed. Our local base in Bald Mountain gives us excellent coverage of the Capital Region, including Albany, Troy, Saratoga Springs, and the surrounding areas.
For longer distances, we coordinate with our network of qualified carriers to ensure your equipment reaches its destination safely. We handle all the logistics, permits, and coordination so you’re working with one point of contact throughout the process.
Whether you’re moving equipment from a dealer to your job site, between project locations, or to storage facilities, we adapt our services to meet your specific transport needs while maintaining the same safety and reliability standards regardless of distance.
Local Resources
Useful Links
Other Services we provide in Bald Mountain
